MOBA Xsite PRO Excavator Control System

With XsiteĀ® PRO excavator control system, the operator creates a model with several levels, inclining on the comfortable, 8.4 inch display. The 2D excavator control system records depth, incline and range of the excavator bucket, depicting the position on the graphic display. The machine operator can then work to implement the specifications, without corrective work. This saves time, fuel, material and increases the efficiency during machine use.

By means of remote support, competent assistance is available in the event of questions. This 2D excavation system also offers an introduction to 3D machine control by means of a software extension. This can be used to create simple 3D profiles with the excavation system. Alignment of the machines is determined with the GNSS compass, making work performance even more accurate. Staking out and manual surveying can be reduced. This saves time, money and personnel, while accelerating the workflow.

Documentation of the work progress is made possible throughout the process. This system can be used during pipe or cabling installation, documenting competed layers, dredging or slope construction.

 

SYSTEM FEATURES

  • Convenient 8.4 inch touch-screen display
  • Creation of 2D profiles directly on the system
  • Extensive 2D functionalities
  • Shows all data and the bucket position on the display
  • Additional LED display
  • Optional sensor for bucket angle measurement
  • Remote support
  • 3D upgrade available

 

SYSTEM BENEFITS

  • Precise results
  • Improves quality of work under conditions with restricted visibility
  • Enables work under water
  • Efficient machine use
  • Saves time and material (no corrective work)
  • Reduces fuel consumption
  • Increased safety at the construction site

 

SYSTEM COMPONENTS

  • Xsite PRO Operating Panel
    • Easy to operate
    • 8.4 inch rugged touch-screen colour display
    • Clear visible overview for the operator
    • Transflective TFT-LCD
    • Touch screen type: capacitive
    • CAN-interface
  • Laser Receiver
    • Automated grade control with laser
    • Reception range 160 mm
  • LED Display
    • Displays current working status
    • Clearly visible LEDs
  • Acceleration sensor
    • Measuring range: 360 deg
    • Water tight: ingress protection IP67
    • CAN-interface
    • Robust, compact design
  • Controller
    • Processes all incoming position data
    • Compares position of the bucket with the design data
  • GNSS Antenna (Single/Dual)
    • Easy handling for installation and servicing
    • Receives the position and elevation data of the machine
  • GNSS Compass (Optional)
    • High precision measurement of orientation
    • Measurement is not affected by surrounding metal elemens such as passing vehicles
    • Easy to build surfaces with cross and long slopes
    • Easy handling for installation and servicing
  • Radio Modem
    • The system is even more precise than to an additional radio modem
    • The radio modem receives correction signals that are sent continuously from a local base station
Disclaimer | Contact Us | Copyright MCE Lasers 2009 | mcelasers@mcelasers.com.au
Subscribe to MCE Newsletter